industri nyheter

funktioner i glasfiberröret

2018-05-23

Deformningsprocessen av fiberglasrör för att härda glasfibern som är impregnerat harts i en fotovoltaisk värme integrerad höghastighetspolymerisationsanordning och därigenom dra eller dra i en formning.På grund av de olika typerna av hartser som används är det känt aspolyesterfiberglas, epoxifiberglas och fenolfiberglas. Det har mAlla egenskaper och dess huvudegenskaper är följande:

 


1.God korrosionsbeständighet. Fiberglasstube kan effektivt motstå korrosion av syra, alkali, salt och andra medier och obehandlade hushållsavloppsvatten, frätande mark, kemiskt avloppsvatten och mångakemiska vätskor. Under normala omständigheter kan den bibehålla långvarig säker drift.

2.Good aging resistance and heat resistance. Glass fiber tube can be used in the temperature range of -40°C~70°C for a long period of time. Despecial high temperature resistant resin can also work normally at temperatures above 200°C.

3. god frostbeständighet Under -20 ° C förekommer inte frysande sprickor i rören.

4. light weight, high strength. Derelative density is between 1.5 and 2.0, only 1/4 to 1/5 of carbon steel, but the tensile strength is close to or even exceeds that of carbon steel, and the specific strength can be compared with that of high-grade alloy steel. Therefore, it has excellent results in aviation, rockets, spacecraft, high-pressure vessels, and other applications that need to reduce its own weight.

6.bra slitstyrka. Innehåll en stor mängd lera, sand och vatten, i rörledningen för rotationsslitage och slagprov jämförelse. Efter 3 miljoner rotationer är slitagedjupet på provrörets innervägg följande: 0,53 mm fortar och emaljbelagda stålrör, 0,52 mm för epoxi- och tjärbelagda stålborrningar och glasstålrör för ytbehandlade stålrör, härdade stålrör. Det är 0,21 mm. Detta gör FRP slitstyrkt.
7.good thermal insulation. FRP is non-conductor, and its electrical insulation is excellent. Deinsulation resistance is between 1012-1015Ω.cm. It is most suitable for use in transmission. Deheat transfer coefficient of glass fiber reinforced plastic area and multi-dose mine area is very small, only 0.23. In five points, the pipeline has excellent insulation properties.

8.small friction resistance, high transmission capacity. Deinner wall of the glass pipe is very smooth, and the roughness and frictional resistance are very small. Decoefficient of roughness was 0.0084, while the concrete pipe had an n value of 0.014 and a cast iron pipe of 0.013.


We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept